LPG Bullet coating manufacturers in Pune, Maharashtra India
Ugam Chemicals are the leading LPG bullet coating manufacturers in Pune Maharashtra India. We provide best quality LPG bullet coating at an affordable price across Pune and Maharashtra.
When LPG gets converted into vapor it requires heat. This heat is taken from the shell of the bullet and hence the bullet becomes cool. The moisture near the surface of the bullet gets condensed over the surface and due to the continuous process of condensation; the bullet surface gets corroded easily. But on the other hand the upper half of the bullet gets heated due to Infrared radiations directly from the Sun. It increases the pressure in the bullet tank and in the lines. So to reduce it we use sprinklers to maintain the temperature of the top surface of the bullet. By using this process continuously there is the wastage of water and the energy bills are also increasing. To protect the surface of the bullet, we need thermal insulation to the bullet. Hence we provide LPG bullet coating for the surface of the bullet. It saves energy, water and so many unnecessary expenses.
Points to know before applying LPG Bullet Coating:
1) LPG is highly inflammable in nature hence installations are very sensitive and need to be taken care off.
2) Avoid negligence as it can cost the lives of many people and can damage property as well.
3) Surface of the tank becomes extremely cool on the lower side during the conversion of liquid to vapor of petroleum gas because of the endothermic reaction.
4) When moisture in the air comes in contact with this surface, it gets converted to water droplets and gets condensed over the tank surface.
5) It can cause heavy rusting of the surface.
6) Upper half of the tank gets heated easily due to radiation in sunlight. and it increases the pressure in the tank starts rising.
7) Sudden rise in pressure tends to the danger to tank and line as well as use of extra gas than required for combustion.
8) To reduce the use of this we are using water sprinklers in summer in order to maintain the pressure in the tank.
9) It causes loss of water, hence increasing the energy bills. There is heat loss or heat leakage from the shell or joints of vaporizers.
10) Heat leakage should be minimized to reduce energy bills